Rockwell Automation 2755 AdaptaScan Bar Code Readers - Manual (Page 66)

Chapter
6
Troubleshooting and
Maintenance
This chapter describes how to isolate and correct the most common
operating problems and perform routine maintenance tasks.
Section Page
Using the Troubleshooting Chart 6–1
Technical Support 6–1
Equipment Required 6–1
Troubleshooting Chart 6–2
LED Indicators 6–3
Cleaning the Scan Window 6–5
Replacing the Scan Window 6–6
If you should require assistance or need additional information on
operating the AdaptaScan Reader, Configuration Software, or
accessories, contact your local Allen-Bradley support office or
Allen-Bradley Technical Support at (216) 646-6800.
Other than verifying that the correct power source is connected to the
wiring base (use a voltmeter), no electronic diagnostic equipment is
required for troubleshooting.
Table 6.A is the AdaptaScan troubleshooting chart. This chart lists
the most common operating problems, the probable causes, and steps
to correct the problem.
Chapter Objectives
Technical Support
Equipment Required
Using the
Troubleshooting Chart