Rockwell Automation 1902 Syncpro II - Manual (Page 19)

Rockwell Automation Publication 1902-IN001B-EN-E - April 2013 21
Chapter
2
Receiving and Storage
Receiving Upon receiving the controller, remove the packing and check for damage that
may have occurred during shipping. Report any damage immediately to the
claims office of the carrier.
Storage It is important to consider the following storage requirements if you are not
installing your controller immediately after receiving it.
• Store the controller in a clean, dry, dust-free environment.
• Storage temperature must be maintained between -20...65 °C (-4...149 °F).
• Relative humidity must not exceed 95%, non-condensing.
IMPORTANT If the SyncPro II is an integral component of a brush-type synchronous starter,
special receiving and handling instructions will apply. For details, refer to the
service manual provided with the equipment.