Rockwell Automation 1902 Syncpro II - Manual (Page 44)

46 Rockwell Automation Publication 1902-IN001B-EN-E - April 2013
Chapter 5 Programming SyncPro II
Set Point 2: Operating Frequency
Allowable Range: 50 or 60 Hz
Factor Default: 60 Hz
Figure 19 - Function Number
Set Point 3: Function Number
Allowable Range: 1...5
Factory Default Setting: 3 (Function curve 3)
In the example below the 50% speed has been set to 5 seconds, and the 95% speed
is set to 20 seconds for a 60 Hz system.
Figure 20 - Trip Time