Rockwell Automation 1902 Syncpro II - Manual (Page 22)

24 Rockwell Automation Publication 1902-IN001B-EN-E - April 2013
Chapter 3 Installation
Open Frame Configuration
The SyncPro II components are mounted on a panel, except the PanelView
display module and the illuminated push button for trip indication and reset
function. See
Figure 2 for mounting dimensions of the main unit panel. Quick
installation within the main controller is possible with this arrangement.
Figure 2 - Mounting Dimensions
IMPORTANT The PanelView is supplied with a two-meter cord for connection with the
SyncPro II processor. Mount the PanelView in a suitable location to make this
connection.
18.02 [458]
16.75 [425]
13.29
[338]
18.95
[481]
20.00
[508]
0.38[10]
13.75[349] 0.63 [16] 0.36 [9] dia.
(4) Mounting Holes
5.1
[113]
Front View
Side View