Rockwell Automation 1902 Syncpro II - Manual (Page 48)

50 Rockwell Automation Publication 1902-IN001B-EN-E - April 2013
Chapter 5 Programming SyncPro II
Alarm History The Alarm Banner screen will appear if any alarm condition exists in the system.
The screen provides three user options:
• Clear Alarm
• Acknowledge Alarm
• Acknowledge All Alarms
The clear Alarm option will remove the currently displayed fault and not record
the fault in the Alarm History.
The Acknowledge Alarm option will remove the currently displayed fault and
record the fault in the Alarm History with the relative time stamp. After a single
alarm has been acknowledged, the next unacknowledged on if any will appear on
the screen. If none unacknowledged alarms are left and all faults have been
cleared the Main Menu Screen will be displayed.
The Acknowledge All Alarm option will remove the currently displayed fault
along with all additional faults in the fault stack/buffer and record all the fault(s)
in the Alarm History with the relative time stamp.
Figure 26 - Acknowledge All Alarm Screen
The Alarm History Screen displays all the acknowledged alarms with date and
time. Using the arrow keys you can scroll through up to 50 previous alarm
conditions. The Alarm History may be cleared with the Clear key.
Figure 27 - Alarm History