Rockwell Automation 6157-C User Manual - Manual (Page 12)

12 Industrial 19" CRT Monitor
Publication 6157-UM001A-EN-P
Panel Mounting Procedure
1. Confirm that the shipping carton contains a package of 10-32 lock
nuts and flat washers. You will need 18 nuts and washers for
installation. Extra lock nuts and washers are provided.
2. Refer to the physical dimension drawing (Figure 4) and confirm that
there is adequate space behind the panel. Remember to allow extra
space for circulation and cabling.
3. Refer to the panel cutout drawing below for dimensions of the panel
cutout and mounting hole locations. Cut and drill the panel.
Note: Use #10-32 or M5 self-locking nuts for mounting.
Figure 5
Panel Mounting Cutout