Rockwell Automation 6157-C User Manual - Manual (Page 3)

Industrial 19" CRT Monitor 3
Publication 6157-UM001A-EN-P
,QGXVWULDO ,QGXVWULDO   &57 0RQLW  &57 0RQLWRRUU
The 6157-C Industrial 19" CRT Monitor is a general-purpose monitor
suitable for a wide range of industrial computing applications. It offers
the following features:
•
Panel and rack mount enclosures
•
Pure flat screen
•
Reliable and rugged industrial design
•
Bright, crisp display
•
Touchscreens
•
Sync-on-green, separate sync, and composite sync video support
•
On-screen display for easy setup
•
Versatile multi-sync design (640x480 to 1600x1200 resolution)
Note: This monitor can display resolutions up to 1600x1200
at 75 Hz. If you experience unexpected results
operating the monitor at this resolution, verify that the
monitor is operating at 75 Hz or less.
ATTENTION: The equipment described in this
document generates, uses, and emits radio frequency
energy. The equipment has been tested and found to
comply with FCC Rules, Part 15, subpart J, for Class A
computing devices.
The use of non-shielded interface or power cords with
Allen-Bradley industrial monitors is prohibited.
ATTENTION: X-ray emissions from these monitors are
typically about 0.05 mR/hr maximum, well below the
0.5 mR/hr maximum recommended by the US.
Department of Health and Human Resources and
specified in "Federal Performance Standards for
Television Receivers", Section 10, Part 1020, Title 21, of
the U. S. Code of Regulation (PL90-620), Vol. 38, No.
198.
These monitors are equipped with X-ray protection
circuits that cause automatic shutdown of the equipment
in case its X-ray emissions begin to approach federal
limits.
Description