Rockwell Automation 6157-C User Manual - Manual (Page 20)

20 Industrial 19" CRT Monitor
Publication 6157-UM001A-EN-P
5. Slide the chassis into the cabinet. Secure the monitor chassis to the
cabinet by installing screws through the four holes in the monitor
front panel in such a way that they engage the threaded holes on the
clip nuts installed previously behind corresponding holes in the rails.
Note: Retainer screws prevent the unit from being pulled out
on its slides accidentally; they are not intended to
support the weight of the unit.
6. Remove the protective adhesive sheet from the screen of the
Industrial Monitor. The sheet is designed to prevent scratching of
the polycarbonate screen protector or the optional touchscreen
during shipping and installation. It should be removed before use.