Rockwell Automation 6157-C User Manual - Manual (Page 46)

46 Industrial 19" CRT Monitor
Publication 6157-UM001A-EN-P
$ $SSHQGL[ % SSHQGL[ % 9 9LGHR & LGHR &DDEOHV EOHV
You can connect the 6157- C Industrial Monitor to the host computer
with an HD-15 connector or with a BNC to HD-15 adapter cable.
An HD-15 video cable equipped with a conventional HD-15 connector at
each end connects the 6157- C Industrial Monitor to the host computer.
Note: This figure is the view looking into the pin end of the male
connector or solder term end of the female connector.
Figure 13
HD-15 Video Connector
The following table provides the pin numbers and corresponding pin
assignments for the HD-15 video connector with the DDC2B capability:
Table G
Standard HD-15 Video Cable
Monitor (Female) Signal Description Host (Male)
1 Red Video 1
2 Green Video 2
3 Blue Video 3
4 Ground 4
5 Ground 5
6 Red Video Ground 6
7 Green Video Ground 7
8 Blue Video Ground 8
9 Not Used 9
10 Sync Ground 10
11 Ground 11
12 Bi-Directional Data (SDA) 12
13 Horizontal Sync 13
14 Vertical Sync (VCLK) 14
15 Data Clock (SCL) 15
HD-15 Connectors