Rockwell Automation 6157-C User Manual - Manual (Page 28)

28 Industrial 19" CRT Monitor
Publication 6157-UM001A-EN-P
Adjusting the On-Screen Display (OSD)
This section explains the on-screen display and explains how to make
operation adjustments.
To display the main menu:
Press
>
or
<
to display the menu. The on-screen display appears on the
screen.
Figure 12
On-Screen Display
You can make all the necessary adjustments by making selections in the
on-screen display using one or all of the operation keys. The following
table describes the controls on the on-screen display.
Table D
On-Screen Display Definitions
Symbol Control Action
Brightness Increases or decreases the intensity
(illumination) of the image.
Contrast Increases or decreases the strength
(lightness or dimness) of the image.
Horizontal
Sizing Increases or decreases the size of the image
horizontally.
Horizontal
Position Moves images horizontally on screen left (-)
or right (+).
Vertical Sizing Increases or decreases the size of the image
vertically.
Vertical
Position Moves images horizontally on screen up (+)
or down (-).
Pincushion Adjusts the side pincushion (or barreling)
Pinbalance Adjusts the curvature of the left and right
sides of the screen image.