Rockwell Automation 6157-C User Manual - Manual (Page 25)

Industrial 19" CRT Monitor 25
Publication 6157-UM001A-EN-P
The 6157- C Industrial Monitor is furnished with operation keys that
allow digital on-screen adjustments. On-screen adjustments are
performed from the on-screen display (OSD). Using the operation keys
on the front panel or rear chassis (depending on the enclosure option),
you can maneuver to the appropriate selection or setting in the menu.
Figure 10
Operation Keys
Select Adjust
Table B
Operation Keys Description Table
Control Description
<
and
>
Arrow keys have several functions:
•
Displays the main menu.
•
If the main menu is displayed, pressing these keys moves the cursor to desired
variable that needs adjusting. Arrow keys to move to the left (<) and to the right (>).
•
Toggles between the control box and any of its secondary control boxes
+
This operation key:
•
Increases the setting in the control box displayed
•
Closes the main menu when the exit box is highlighted. This action memorizes any
settings and completes the adjustments.
•
Answers “Yes” to questions.
- This operation key:
•
Decreases the setting in the control box displayed
•
Closes the main menu when the exit box is highlighted. This action memorizes any
settings and completes the adjustments.
•
Answers “No” to questions.
Operating the 6157- C
Industrial Monitor