Rockwell Automation 6157-C User Manual - Manual (Page 48)

48 Industrial 19" CRT Monitor
Publication 6157-UM001A-EN-P
Specifications
Display
CRT Type 19 in. diagonal pure flat, 0.25mm dot pitch
RGB short persistence, Anti-glare treated, Anti-static,
INVAR shadow mask
Degaussing Manual and automatic
Nominal Display Area
(4:3 aspect) Horizontal
(4:3 aspect) Vertical
Diagonal
14.17 in. (360mm)
10.63 in. (270mm)
17.72 in. (450mm)
Non Linearity (CHP Method)
Horizontal
Vertical
7% max
6% max
Regulation 2mm max peak deviation
Misconvergence 0.3mm max inside (centered circle 225mm diameter)
0.4mm max outside
Luminance (typical) 35 fL, small white square
CIE coordinates
White x:=0.283, y:=0.298 (9300K +8MPCD)
Video
Resolution 1600x1200 max at 75Hz max
Supported Standards IBM VGA (640x480 at 60Hz, 720x400 @ 70 Hz )
VESA (640x480 at 60/75/85Hz, 800x600 at
60/75/85 Hz, 1024x768 at 60/75/85 Hz, 1280x1024 at
60/75/85 Hz, 1600x1200 at 75 Hz)
Horizontal Scan Rate Variable: 30-98kHz
Vertical Scan Rate Variable: 50H-160Hz
Video Dot Rate 210MHz
Video Input Signal RGB analog (white level = 0.714V above ref. black,
into 75 Ohms, single ended)
Sync Input Signals • Separate horizontal and vertical sync control,
TTL signal levels
• Sync on green
• Composite sync
Input Connection HD-15, Plug and Play DDC1/2B
Controls and Indicators Front Panel: On-Screen Display, Power, Sync
detection
Operator Input Touchscreen Option: Resistive, capacitive, or SAW
touchscreen, with serial controller and driver software