Rockwell Automation 6157-C User Manual - Manual (Page 45)

Industrial 19" CRT Monitor 45
Publication 6157-UM001A-EN-P
Once you have obtained this information, install the software using the
installation disks found in the touchscreen accessory package.
Note: Before installation, you may want to check the touchscreen
manufacturer’s site on the World Wide Web for the latest
software drivers. Enter these addresses in your Internet
browser:
•
www.elotouch.com for resistive and SAW touchscreens
•
www.microtouch.com for capacitive touchscreens.
After installing the driver software, follow the instructions in the
touchscreen documentation.
Following installation of the touchscreen software and calibration, the
touchscreen is ready to use.
Performing a Calibration