Rockwell Automation 57C435 Processor Module, AutoMax - Manual (Page 2)

E Copyright Reliance Electric Industrial Company 1996.
Motorolat 68010 and 68020 aretrademarks of Motorola, Inc.
AĆBt is a trademark of AllenĆBradley Corporation.
IBMt is a trademark of International Business Machines, Inc.
Modbust is a trademark of Gould, Inc.
Multibust is a trademark of Intel Corporation.
Reliancer and AutoMaxr are registered trademarks of Reliance Electric Company
ąor its subsidiaries.
The information in this user's manual is subject to change without notice.
WARNING
ONLY QUALIFIED PERSONNEL FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE CONTROLLED EQUIPMENT SHOULD INSTALL, ADJUST,
OPERATE, OR SERVICE THIS EQUIPMENT. READ AND UNDERSTAND THIS
MANUAL AND OTHER MANUALS APPLICABLE TO YOUR INSTALLATION.
FAILURE TO OBSERVE THIS PRECAUTION COULD RESULT IN BODILY INJURY.
WARNING
INSERTING OR REMOVING THIS MODULE OR ITS CONNECTING CABLES MAY
RESULT IN UNEXPECTED MACHINE MOTION. POWER TO THE MACHINE
SHOULD BE TURNED OFF BEFORE INSERTING OR REMOVING THE MODULE
OR ITS CONNECTING CABLES. FAILURE TO OBSERVE THESE PRECAUTIONS
COULD RESULT IN BODILY INJURY.
CAUTION: This module contains staticĆsensitive components. Careless handling can
cause severe damage. Do not touch the connectors on the back of the module. When
not in use, themoduleshould bestored in an antiĆstatic bag. Theplastic cover should
not be removed. Failure to observe this precaution could result in damage to or
destruction of equipment.