Rockwell Automation 57C435 Processor Module, AutoMax - Manual (Page 8)

1Ć2
1.1 Additional Information
You should befamiliar with thefollowing related publications to use
the AutoMax Processor correctly:
D JĆ3616Ć1 Kermit Communications Software Instruction Manual
D JĆ3618 Norton Editor Instruction Manual
D JĆ3636 Common Memory Module Instruction Manual
D JĆ3649 AutoMax Configuration Task Manual
D JĆ3675 AutoMax Enhanced Basic Language Instruction Manual
D JĆ3676 AutoMax Control Block LanguageInstruction Manual
D JĆ3677 AutoMax Ladder Logic Language Instruction Manual
D J2Ć3093 AutoMax Enhanced Ladder Editor
D J2Ć3094 AutoMax Enhanced Ladder Language Reference
D Your ReSourceAutoMax ExecutiveSoftwareLoading Instructions
D Your ReSource AutoMax Programming Executive Instruction
Manual
D IEEE 518 Guidefor TheInstallation of Electrical Equipment to
Minimize Electrical Noise Inputs to Controllers
D Your personal computer and DOS operating system manual(s).
D Other instruction manuals applicable to your hardware
configuration
1.2 Related Hardware and Software
M/N 57C430A contains one 256K AutoMax Processor module.
M/N 57C431 contains one 512K AutoMax Processor module.
M/N 57C435 contains one 512K AutoMax Processor module. The
Processor moduleis used with thefollowing hardwareand software,
which can be purchased separately:
1. IBMĆcompatible personal computer running DOS V3.1 or later.
2. ReSourceAutoMax Programming Executivesoftware(various
model numbers).
3. M/N 61C127 RSĆ232C ReSource Interface Cable. This cable is
used to connect the personal computer to the Processor module.
If you wish, you may also build your own cableusing thepin
description found in Appendix C.
4. M/N 57C413B, 57C423 Common Memory module. This module
is used when there is more than one Processor in the rack.
5. RSĆ232C cable used for communicating with other devices
through the Processor ports in the rack not reserved for
connection to the personal computer. If you intend to use these
ports, you will need to build your own cable using the pin
description found in Appendix C.
6. M/N 57C331, 57C332 or 57C334 AutoMax PanelĆMount Rack.
7. M/N 57C491, M/N 57C493, or M/N 57C494 AutoMax Power
Supply Module.