Rockwell Automation 57C435 Processor Module, AutoMax - Manual (Page 9)

1Ć3
8. M/N 57C385 AutoMax Replacement Battery. Note that the
Processor module comes equipped with one (1) battery.
9. M/N 57C404A Network Communications module. This module is
used to connect racks together as a network and supports
communication with all racks on thenetwork that contain
57C404A modules through a single Processor module. M/N
57C404 can be used to connect racks on a network; however,
you cannot communicateover thenetwork to theracks that
contain M/N 57C404 Network modules. You must instead
connect directly to the Processors in these racks.
1.3 Compatibility with Earlier Versions
AutoMax Processor module M/N 57C430A, M/N 57C431, and
M/N 57C435 arenot compatiblewith Version 1.0 of theAutoMax
Programming Executivesoftware(M/N 57C304Ć57C307).
Processor module M/N 57C430A and M/N 57C431 require Version
2.0 or later of the AutoMax Programming Executive software.
M/N 57C435 requires Version 3.1 or later of the AutoMax
Programming Executive software. M/N 57C430 cannot coĆexist in the
samerack with M/N 57C430A, 57C431, or 57C435.
AutoMax Programming
Executive Software
Compatible
Processor Module
Version 1.0
M/N 57C304, 57C305
M/N 57C306, 57C307 (updates)
M/N 57C430
M/N 57C430
Version 2.0
M/N 57C390, 57C391
M/N 57C392, 57C393 (updates)
M/N 57C430A
M/N 57C430A
Version 2.1D
M/N 57C391
M/N 57C393 (update)
M/N 57C430A
M/N 57C431
M/N 57C435
M/N 57C430A
M/N 57C431
M/N 57C435
Version 3.0
M/N 57C395
M/N 57C397 (update)
M/N 57C430A
M/N 57C430A
Version 3.1
M/N 57C395
M/N 57C397 (update)
M/N 57C430A
M/N 57C431
M/N 57C435
M/N 57C430A
M/N 57C431
M/N 57C435
Version 3.3 and later*
M/N 57C395
M/N 57C397 (update)
M/N 57C430A
M/N 57C431
M/N 57C435
M/N 57C430A
M/N 57C431
*Notethat if you areusing theAutoMax Programming Executivefor
drivecontrol applications, theUniversal DriveController module
(B/M 57552) is supported only in Version 3.3 and later of the
Programming Executive software.