Rockwell Automation 47C626 AutoMax Programming Executive V4.2 User Manual
Page 114
7Ć8
Page
Page
Figure 7.2 Ć Variable Configurator Menus
The following fields appear at the top of the form used to configure
the selected module. The form used for Network modules is slightly
different. Refer to section 7.2.3 for more information about the form.
Function: function of the register/bit, if any. If this field contains a
name, e.g., Interrupt Reset," this is the dedicated
function assigned to the register/bit; otherwise, the field
contains a generic description plus the register/bit number
Reg:
register number on I/O module or item number for
common memory variables
Bit:
bit number within the register or an * if bits are
configured for the register. In addition, for network
modules, a +" will be displayed if the register contains
global bits that are not being used in the rack.