Rockwell Automation 47C626 AutoMax Programming Executive V4.2 - Manual (Page 37)

5Ć3
5.1.2 Copying a System
You can copy an existing system and save it to an AutoMax library.
Use the following procedure to copy a system.
Step 1.
Select Copy from the System menu to display the Copy
System dialog box (see figure 5.3).
Step 2. Select the source drive, library, and system. Select OK to
continue, or Cancel to return to the System Configurator
without copying the system.
Step 3. The Modify Destination System dialog box is displayed
(see figure 5.4). Enter the following information:
Name Ć The application name, an alphanumeric string of up to 8
characters (no spaces, hyphens, or underscores). The name must be
unique within the current library. (R)
Customer Ć The end user of the system, an alphanumeric string of up
to 40 characters. (O)
Engineer Ć The engineer in charge of the system, an alphanumeric
string of up to 31 characters. (O)
Description Ć A description of the system, an alphanumeric string of
up to 40 characters. (O)
Step 4.
The Copy System Status dialog box is displayed while the
selected system is being copied. You can abort the
process by selecting Abort at any time. When the process
is complete, the system is added into the list of systems in
the System Configurator in alphabetical order.
Figure 5.3 Ć Copy System Dialog Box