Rockwell Automation 47C626 AutoMax Programming Executive V4.2 - Manual (Page 72)

5Ć38
be different than the name of the rack being imported, i.e.,
the subdirectory in which the rack is located.
10Ćslot or 16Ćslot rack Ć Select the appropriate type of rack.
Location Ć An alphanumeric string of up to 7 characters
that identifies where the rack is physically located. This is
not the drive\directory location of the rack.
Engineer Ć Enter the name of the engineer in charge of the
rack.
Description Ć A description of the rack; an alphanumeric
string of up to 40 characters.
Step 3. A dialog box for the Source Directory will be displayed on
the screen. Enter the rack source directory path, including
the drive and subdirectory. Type over the default path
displayed if changes are required.
Step 4. Select OK to start the import or select Cancel to return to
the Rack Configurator without importing the rack.
If the import process is unsuccessful, the rack created at the
beginning of the procedure will be deleted from AutoMax Executive
V4.x automatically.
5.3.13 Selecting All Racks
The Select All command selects all the racks listed for the selected
system and section. Select All can be used when you want to
transfer, print documentation files, or remove all of the racks for a
selected section. To select one rack after selecting all, simply click on
the desired rack.
5.3.14 Configuring Racks
Select Configure Rack from the Rack menu (or doubleĆclick the left
mouse button on the desired rack) to access the Rack Configurator,
which is used to add modules to a rack, display or modify
information for existing modules, move modules to other slots in a
rack, or remove modules from a rack. You can also access the
Variable Configurator from the Rack Configurator. See section 6 for
how to use the Rack Configurator.
5.3.15 Creating Application Tasks
Select Manage Tasks from the Rack menu to access the Task
Manager. The Task Manager is used to edit, copy, transfer, compile,
and print tasks, as well as to add the tasks to the selected rack. The
On line menu, which allows you to download application tasks to the
AutoMax rack, put them into run, and monitor, is also available from
the Task Manager. See section 8 for how to use the Task Manager.
5.3.16 Using System Tokens and Token Passwords
If you are using tokens to protect your database files, the command
Set Token Password" will appear on the Rack menu. Refer to
Appendix J for a description of how to use this command.