Rockwell Automation 47C626 AutoMax Programming Executive V4.2 - Manual (Page 82)

5-48
menu. If you want to use a different text editor, enter the
filename of the text editor (including the .COM or .EXE
extension) you want to use with AutoMax.
Drive for temporary files - Enter the letter of the drive to contain
temporary files. A non-network hard disk drive is required for
temporary workspace to ensure exclusive access. (R)
Switch for formatting a 5-1/4 floppy to 360Kb: Enter any DOS
formatting parameters required to format a 5-1/4” floppy to
360Kb for your floppy disk drive. For example, if you wanted to
format a low density disk in high density drive A, the DOS
format command would be FORMAT /4 A:, so you would enter/4
for this field. (O)
Switches for formatting a 3-1/2 floppy to 720Kb - Enter any DOS
formatting parameters required to format a 3-1/2” floppy to
720Kb for your floppy disk drive. (O)
PVCS Installed - Select this check box if you have PVCS on
your network drives and you want to use the VCL facility. See
Appendix P for more information.
User Name - Enter the user name using up to 31 characters.
The user name will appear in system messages.
Exit Windows when exiting the AutoMax Programming
Executive - The default is to exit Windows when you exit the
AutoMax Programming Executive. If you de-select this check
box, you will return to the Windows Program Manager when
exiting AutoMax.
Figure 5.26 - AutoMax Setup
When you have finished making changes, select OK, or Cancel if you
have changed your mind.