Rockwell Automation MPAR Electric Cylinders - Manual (Page 16)

16 MP-Series Electric Cylinders
Rockwell Automation Publication MPAR-IN001D-EN-P - September 2012
Actuators are designed to metric dimensions. Inch dimensions are approximate conversions from
millimeters. Dimensions without tolerances are for reference.
MP-Series Electric Cylinder Dimensions (in-line, frame 40)
Electric Cylinder
Cat. No. L7 (1)
mm (in.)
LB (1)
mm (in.)
LE (2)
mm (in.)
P
mm (in.) AD
mm (in.) HD
mm (in.)
MPAR-x2100C-V2A 501.2 (19.73)
151.5
(5.96)
77.2 (3.04) 55.0 (2.17) 66.5 (2.62) 94.0 (3.70)
MPAR-x2200C-V2A 601.2 (23.67)
MPAR-x2300C-V2A 701.2 (27.61)
MPAR-x2400C-V2A 801.2 (31.54)
MPAR-x2600C-V2A 1001.2 (39.42)
MPAR-x2100F-V2A 492.1 (19.37)
140.1
(5.52)
65.1 (2.56) 70.0 (2.76) 74.0 (2.91)
109.0
(4.29)
MPAR-x2200F-V2A 592.1 (23.31)
MPAR-x2300F-V2A 692.1 (27.25)
MPAR-x2400F-V2A 792.1 (31.19)
MPAR-x2600F-V2A 992.1 (39.06)
(1) If you are ordering an MPAR-x2xxxC-V4x actuator with brake, add 36.1 mm (1.42 in.) to dimensions L7 and LB.
If you are ordering an MPAR-x2xxxF-V4x actuator with brake, add 39.0 mm (1.54 in.) to dimensions L7 and LB.
(2) If you are ordering an MPAR-x2xxxC-V4x actuator with brake, add 33.4 mm (1.31 in.) to dimension LE.
If you are ordering an MPAR-x2xxxF-V4x actuator with brake, add 24.7 mm (0.97 in.) to dimension LE.
MP-Series Electric Cylinder Dimensions (parallel, frame 40)
(1)
Electric Cylinder
Cat. No. L71
mm (in.) LC
mm (in.) HC
mm (in.) C (2)
mm (in.)
CG
mm (in.) PW
mm (in.)
MPAR-x2100C-V2B/D/E 356.5 (14.03)
56.0 (2.20) 157.0 (6.18) 91.5 (3.60) 27.0 (1.06) 60.0 (2.36)
MPAR-x2200C-V2B/D/E 456.5 (17.97)
MPAR-x2300C-V2B/D/E 556.5 (21.91))
MPAR-x2400C-V2B/D/E 656.5 (25.84)
MPAR-x2600C-V2B/D/E 856.5 (33.72)
MPAR-x2100F-V2B/D/E 369.5 (14.55)
69.0 (2.72) 188.5 (7.42) 102.5 (4.035) 38.0 (1.50) 86.0 (3.38)
MPAR-x2200F-V2B/D/E 469.5 (18.48)
MPAR-x2300F-V2B/D/E 569.5 (22.42)
MPAR-x2400F-V2B/D/E 669.5 (26.36)
MPAR-x2600F-V2B/D/E 869.5 (34.23)
(1) For complete dimensions of the parallel configuration electric cylinders, use the in-line dimensions for an electric cylinder with the
same rod-stroke length and the dimensions from this table.
(2) The tolerance for this dimension is ±1.0 mm (0.04 in.).