Rockwell Automation T8082 Trusted Toolset Suite - Manual (Page 11)

Trusted
TM
Toolset Suite T8082
Issue 14 Feb 10 PD-T8082 11
1.1. Licensing
Before release 3.5, the toolset requires a parallel port dongle to be fitted to the computer’s parallel port.
This must be present during the final stages of application compilation, when saving the I/O connection
table and when downloading an application.
From release 3.5, there are three choices:
• An updated parallel port dongle, present at all times whilst the toolset is running (T8082P)
• A USB port dongle, present at all times whilst the toolset is running (T8082U)
• A software license, which will require the PC to have an Email client (T8082D)
A software license may be obtained using a separate program. From the Windows Start menu, select
All Programs | Trusted | Licensing.
Figure 1 Licensing Program
If a parallel or USB dongle is present, then ‘ISaGRAF 3 Hardware Key’ will not be grey. To request a
license, click on ‘ISaGRAF 3 Software License’ and click Add.