Rockwell Automation T8082 Trusted Toolset Suite - Manual (Page 19)

Trusted
TM
Toolset Suite T8082
Issue 14 Feb 10 PD-T8082 19
2.3.1. Menu Structure
The Template menu allows the user to create new templates, edit existing templates and delete
templates that are no longer required. These facilities are replicated by the buttons on the right-hand
side of the display.
The View menu allows the user to sort existing templates in alphabetical order. This facility is
replicated by a button on the right-hand side of the display.
The Archive Tool menu allows the user to save the template configuration, extract the template
configuration, completely delete template configuration, archive templates and restore templates.
These archives ensure that an entire System.INI configuration and associated templates are backed
up correctly and available to transfer to another Engineering Workstation. Refer to section 2.16 for
details. Note that from release 3.5, templates are extracted from the System.INI file itself, and so only
the System.INI file needs to be archived. However, if the configuration needs to be transferred to a
toolset issue before release 3.5, then a template archive is necessary.
All templates are listed in the Existing Templates window on the display. The contents of each
template may be viewed by selecting the required template. This will cause the contents of the selected
template to be displayed in the Quick View window of the display. Selecting Edit on the right hand side
of the window will allow modifications to be made to this existing template.
2.3.2. New Templates
To create a new template from the Trusted TM System Template Editor, select the New button on the
right-hand side of the display. The Template Creation window is displayed as shown in Figure 9 below.
Figure 9 Template Creation Window
From the Template Creation window shown above, select the module type. Each template created
can only be assigned to one module type. The available template types for that module are then
available in the menu below. If ‘[All Module Types]’ is selected, the templates available may be