Rockwell Automation T8082 Trusted Toolset Suite - Manual (Page 67)

Trusted
TM
Toolset Suite T8082
Issue 14 Feb 10 PD-T8082 67
Dictionary tag comments can be assigned by inserting a comment box into the program and typing
@VarCom(dictionary tag) . This will lift the comment field from the dictionary and display it in the
comment box as illustrated in Figure 47 above.
6.3. Power Flow Debugging
Figure 48 Power Flow Debugging Off
Power Flow Debugging is an option that makes complex logic resolution more efficient and easier to
read. Interconnections between gates are animated blue or red according to their state without having
to connect them to internal tags Figure 48 above shows Power Flow Debugging turned off. Note that
the connection between the & (AND) and =1 (exclusive OR) gates is black.
To enable this function from the program editing window, select Option then Enable power flow
debugging as shown in Figure 49 below.
Figure 49 Enable Power Flow Debugging
When the application is compiled and downloaded, the Power Flow Debugging facility will be enabled.
Compare Figure 48 above with Figure 50 below, where the connection between the gates now reflects
the logic state.
Figure 50 Power Flow Debugging On