Rockwell Automation T8082 Trusted Toolset Suite - Manual (Page 43)

Trusted
TM
Toolset Suite T8082
Issue 14 Feb 10 PD-T8082 43
2.8. Trusted TM I/O Modules
Having completed the configuration of the TMR Processor, Expanders and Communication Interface
modules the user may assign Trusted
TM I/O modules to the pre-defined slots in the both the Trusted TM
Controller and Expander Chassis.
This is achieved by placing the mouse cursor on the slot then clicking the right-hand mouse button.
This will cause the Replace Item In Slot window shown in Figure 30 below to be displayed.
Figure 30 ‘Replace Item in Slot’ Window
The Replace Item In Slot window shows the Trusted TM modules which may be assigned to a
Controller Chassis.
Modules are assigned to the empty slots by selecting the appropriate module type then selecting the
OK button. This process must be repeated until all required modules have been assigned to the
correct slots.
Having completed the assignment of modules to their correct slots, the user may configure each
module as required. This is achieved by pointing the mouse at the appropriate module in the
Controller or Expander Chassis and pressing the left-hand button. This will cause the Module
Definition window shown in Figure 31 below to be displayed, in this example for an 8403 Digital Input
Module.