Rockwell Automation T8082 Trusted Toolset Suite - Manual (Page 34)

Trusted
TM
Toolset Suite T8082
Issue 14 Feb 10 PD-T8082 34
2.3.17. Shutdown Template Editor
From the Template Creation window, select Shutdown (Output Modules Only), then select the Edit
button. This will cause the Shutdown Editor window shown in Figure 17 below to be displayed.
Figure 17 Shutdown Template Editor (pre and post release 3.5)
For earlier versions, the Shutdown Template Data area of the Shutdown Editor window will normally
be blank when initially editing this template. If there are entries in this area, they may be deleted by
highlighting them and selecting the Remove button to delete individual entries, or the Remove All
button to globally delete entries. For later versions, all channels are unassigned by default.
The template is configured using the options and facilities available in the Editor area of the
Shutdown Editor window (earlier versions) or by right clicking on each channel (later versions). The
above displays show that channels 4 and 7 have been set to the Energise The Output option. All
module outputs may be forced to a pre-determined state by selecting the Set All button in the Global
Entry area.
When the correct option and channels have been selected, the user must select the OK button. This
will return the user to the Template Creation window which permits the newly created template to be
saved. The filename must not include any spaces. Underscores are recommended.
2.3.18. Channel Type Templates
This template defines the Trusted TM Zone Interface Module channel configuration. Each channel on a
Zone Interface Module can either be an input or output. The default configuration is with all channels
set as inputs.