Rockwell Automation T8082 Trusted Toolset Suite - Manual (Page 15)

Trusted
TM
Toolset Suite T8082
Issue 14 Feb 10 PD-T8082 15
2.1. Accessing the System Configuration Manager
The System Configuration Manager is used off-line to create/edit SYSTEM.INI files, and is accessed
by selecting the Tools / isa.mnu / System Config in the Toolset program folder. The opening screen
is shown in Figure 5 below.
Figure 5 System Configuration Tool Opening Screen
The opening screen shown above is used as an example only and depicts a single-chassis Trusted TM
System housing a single TMR Processor. Only one Processor will be displayed even if two are fitted.