Rockwell Automation T8082 Trusted Toolset Suite - Manual (Page 58)

Trusted
TM
Toolset Suite T8082
Issue 14 Feb 10 PD-T8082 58
3.2. Icons
The icons displayed on each board slot indicate the type and attributes of variables
that may be connected to the board channels. The IEC1131 TOOLSET system does
not allow the connection of variables of different types on the same board. Icons for
board types are as shown below.
……..boolean type
……..integer/real type (both types of variables may be connected)
……..message type
……..inputs - no channel connected
……..outputs - no channel connected
……..inputs - at least one channel connected
……..outputs - at least one channel connected
The icons shown below are used to show the type of I/O device installed on a slot.
……..complex I/O equipment
……..real I/O board
……..virtual I/O board
The icons shown below are used to draw a parameter or a channel.
……..board parameter
……..free channel
……..connected channel
Use the buttons shown below in the toolbar, or Edit / Move board up/down menu commands, to
move the selected I/O board one line up or down in the main list.
……Moving boards in list
The Edit/Insert slot command inserts an empty slot at the current position.