Rockwell Automation T8082 Trusted Toolset Suite - Manual (Page 54)

Trusted
TM
Toolset Suite T8082
Issue 14 Feb 10 PD-T8082 54
2.14. Downloading to the TMR Processor
The System.INI file may be downloaded to the Trusted TM TMR Processor by selecting the Download
.INI Buffer to MP button on the tool bar of the System Configuration Manager screen, shown in
Figure 39 below.
Figure 39 Download INI Buffer to MP Icon
Selection of the Download .INI Buffer to MP button starts the process of downloading the System.INI
file to the Processor, given that the communications is set up and the Trusted
TM System TMR
Processor keyswitch is set in the Maintain position. Whilst this taking place, the Communications in
progress window shown below is displayed.
Figure 40 Communications in Progress
The System.INI file is transmitted in packets of data. The TX LED in the Communications in
progress window flashes as each packet of data is being downloaded. The RX flashes to indicate that
a packet has been successfully downloaded.
The Cancel button changes to OK when all data has been successfully downloaded. When this has
occurred, the user must select OK to return to the System Configuration Manager screen.
Note: Once downloading of the edited/new SYSTEM.INI file has been completed, the user can either
reboot the Trusted TM TMR Processor to implement the file, or stop then start the application.