Rockwell Automation 1440-RMA00-04RC XM-440 Master Relay Module - Manual (Page 86)

Rockwell Automation Publication GMSI10-UM009D-EN-P - June 2011
86 DeviceNet Objects
7 Get/Set Delay USINT The time period that the
voting logic must be true
before the relay is
activated. 0 to 25.5 seconds
(specified in tenths of seconds)
8 Get/Set Name STRING2 A name to help identify
the relay. 18 characters maximum
9 Get/Set Alarm Level BYTE Specifies what alarm
status values will cause
the relay to activate. 0 = Normal
1 = Alert
2 = Danger
3 = Disarm
4 = Xdcr Fault
5 = Module Fault
6 = Tachometer Fault
7 = Unknown
12 Get/Set Logic USINT Indicates the number of
associated alarms that
must have a status value
specified by Alarm Level
in order to activate the
relay. The number of alarms that must
meet or exceed the Alarm
Level condition(s) before the
relay is activated.
For example if there are 8
alarms in the Alarm List and
the Logic attribute is set to 3,
the relay will activate when any
3 or more of the 8 alarm
statuses exist at the same time.
13 Get/Set
Alarm List STRUCT of A list of Alarms used to
determine the relay
status.
Number USINT The number of alarms in
the list. The number of 3 USINT sets that
follow (1-16). The USINT specify
the device from which the alarm
comes from and the location
within that device’s COS
Assembly where the particular
alarm status is found.
List Array of
STRUCT of
MAC ID USINT Specifies the device that
maintains the alarm. 0-63
Byte Offset USINT Specifies the byte in the
device’s COS Assembly
that contains the alarm
status. 0-255
Bit Offset USINT Specifies the bit within
the byte where the alarm
status value begins.
Table C.26 Relay Object Instance Attributes
Attr ID
Access
Rule
Name Data Type Description Semantics