Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 649)

RSView32 commands

A–29
Derived Derived [file]
In edit mode, without the parameter opens the Derived Tag editor.
With the parameter, opens the specified derived tag file.
[file] The name of a derived tag file without a file
extension.
DerivedOff DerivedOff <file>
Stops running the specified derived tag file.
<file> The name of a derived tag file without a file
extension.
DerivedOn
DerivedOn <file>
Starts running the specified derived tag file.
<file> The name of a derived tag file without a file
extension.
To have a derived tag file automatically start when a project starts,
open the Startup editor, click the Derived Tags check box and specify
a file.
Display Display <file> [/B] [/E] [/U] [/O] [cache] [/Pfile] [/Ttag_name]
[/Hnnn] [/Wnnn] [/Min] [/Max] [position]
Runs the specified graphic display file. Parameters specified here
override settings in the Display Settings dialog box in the Graphic
Display editor.
If you are using the Cache After Displaying option in the Display
Settings dialog to cache displays, use the position parameters with the
Display command to ensure that displays open in the correct position
after caching. Otherwise, if a user moves a display at runtime, the new
position is remembered by the cache option.