Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 671)

RSView32 commands

A–51
RecipeEdit RecipeEdit [file]
Without the parameter, opens the Recipe editor. With the parameter,
opens the specified recipe file.
[file] The name of a recipe file without a file extension.
RecipeRestore
RecipeRestore <file>
Reads the values from a recipe file into all input fields in the active
graphic display. This command is used with the Recipe field.
<file> The name of the file, without a file extension, tag
values are read from.
This command operates on the active graphic display. If no display is
active, this command is ignored.
RecipeSave
RecipeSave <file>
Saves the values in all input fields of the active graphic display to a
recipe file. This command works with the Recipe field.
<file> The name of the file, without a file extension, to
which the values will be saved. If a file of this name
does not exist, it is created. If a file of this name does
exist, this command prompts you to overwrite it.
This command operates on the active graphic display. If no display is
active, this command is ignored.