Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 666)

A–46

RSView32 User’s Guide
See also PrevPosition and NextPosition
PrevPosition
PrevPosition
Moves focus to the object with the previous index number.
This command operates on the active graphic display. If no display is
active, this command is ignored.
Shift–Tab also moves focus to the object with the previous number.
See also Position and NextPosition.
PrevWindow PrevWindow
Moves focus to another open graphic display.
Ctrl–Shift–Tab and Ctrl–Shift–F6 also move focus to another open
graphic display.
See also NextWindow.
PrintDisplay PrintDisplay [parameter] [/Wait=tttt] [/U] [/Pfile] [/Ttag_name]
Prints the specified graphic display to the default printer. If no display
is specified, prints the display that has focus.
[parameter] Specifies which graphic display to print, as follows:
file
The name of a graphic display file
without a file extension.
me The current graphic display (the
display from which the command
is executed).
[/Wait=tttt] Specifies the amount of time to wait before starting
to print, where tttt is the time in milliseconds. If you
use the /U parameter, specify enough time to allow
for the upload of tag values. If you do not specify a
time, the default is 2000 milliseconds.