Local keypad operation – Rockwell Automation SP200 Quick Start Guide User Manual
Page 18
8
SP200 AC Drive Quick Start Guide
Local Keypad Operation
1
In display mode, the UP ARROW key increments the local speed reference.
In program mode, this key increments the parameter number or parameter
value.
2
The PROGRAM key toggles between display and program modes. The
PROGRAM LED (5) turns on when the drive is in program mode.
3
In display mode, the ENTER key increments to the next display parameter.
In program mode, this key toggles between the parameter number and
parameter value.
4
The RUN LED turns on when the drive is running in either the foward or
reverse direction. The RUN LED flashes while the drive is changing
direction.
5
The PROGRAM LED turns on when the drive is in program mode.
6
In display mode, the DOWN ARROW key decrements the local speed
reference.
In program mode, this key decrements the parameter number or parameter
value.
7
The STOP key issues stop and fault reset commands to the drive.
8
The START key issues start commands to the drive when P-10 = 1.
9
The display shows either a parameter number or a parameter value.
The parameter numbers are preceded by either a “P-” or a “d-”.