Rockwell Automation SP200 Quick Start Guide - Manual (Page 2)

©1998 Rockwell International Corporation
The information in this manual is subject to change without notice.
Throughout this manual, the following notes are used to alert you to safety
considerations:
Important: Identifies information that is critical for successful application and
understanding of the product.
!
ATTENTION: Identifies information about practices or circumstances
that can lead to personal injury or death, property damage, or
economic loss.
SP200 and Reliance are trademarks of Rockwell Automation.
!
ATTENTION: Only qualified personnel familiar with the construction
and operation of this equipment and the hazards involved should
install, adjust, operate, and/or service this equipment. Read and
understand this document in its entirety before proceeding. Failure to
observe this precaution could result in severe bodily injury or loss of
life.
ATTENTION: After disconnecting input power, wait three minutes to
insure that DC bus capacitors are discharged. Failure to observe this
precaution could result in severe bodily injury or loss of life.
ATTENTION: The user is responsible for conforming with all
applicable local and national codes. Failure to observe this precaution
could result in severe bodily injury or loss of life.
ATTENTION: Checking the direction of motor rotation requires
rotating parts and/or electrical circuits to be exposed. Stay clear if the
motor must be running. Disconnect, lockout, and tag the power source
if contact must be made. Failure to observe this precaution could result
in severe bodily injury or loss of life.