Rockwell Automation Motion Analyzer Software - Manual (Page 199)

Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012 199
Sizing Your System Chapter 2
2.6. Choose Your Electric
Cylinder Series
Use the Electric Cylinder Selection
tab to enter application requirements and
select a viable electric cylinder series.
Figure 148 - Electric Cylinder Selection Dialog Box
Enter the following parameters to further narrow the electric cylinder options
and help you decide which actuator is best for your application.
Table 118 - Electric Cylinder Selection Properties
Parameters Description
Applications
Requirements
(label 1 in
Figure 148 )
Maximum Speed
Values are based on the information you entered in the previous tabs. These values cannot be
changed in this tab.
Continuous Force
Peak Force
Ambient
Temperature
Ambient temperature for the application environment.
Altitude Altitude for the application environment.
Brake From the Brake pull-down menu, choose YES or NO depending on your application.
Display Window
(label 2 in
Figure 148 )
Displays the available electric cylinder options.