Load tab – Rockwell Automation Motion Analyzer Software User Manual
Page 224
224
Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012
Chapter 3
Understanding Your System Solution
3.2.2.2.2. Load Tab
Follow these steps to adjust the load parameters.
1. Select the Load parameter you would like to
analyze.
This becomes the parameter corresponding
to the X-axis on the graph. The number
next to each parameter indicates the
parameter value based on the current system
configuration.
2. Adjust the selected load parameter range
and number of steps in the Low, High, and
Steps text boxes, as needed.
3. Click Plot Graph to refresh the chart when
you have finished entering the values.
4. Click Setup to enter all of the ranges and numbers of steps for the Load
parameters in the Tolerance Analysis - Setup dialog box.
5. Select whether to enter data ranges as Percentages of nominal values or as
actual Values.
6. Enter the Low, High, and Steps values in the text boxes.
7. Click OK.