Figure 29, Tool for piston seal – Metrohm 882 Compact IC plus – Anion – MCS User Manual
Page 77
Advertising
■■■■■■■■■■■■■■■■■■■■■■
5 Operation and maintenance
882 Compact IC plus – Anion – MCS
■■■■■■■■
67
for removing the old piston seal and a sleeve for inserting the new piston
seal.
2
1
Figure 29
Tool for piston seal
1
Pin
Tip for removing the old piston seal.
2
Sleeve
Sleeve for inserting the new piston seal.
Caution
Screwing the special tool for the piston seal (6.2617.010) into the pis-
ton seal destroys this completely!
1 Removing the piston seal
Caution
Avoid touching the sealing surface in the pump head (13-4) with
the tool.
Screw the special tool for the piston seal (29-1) with the narrow side
just as far into the piston seal as the same can be removed.
Advertising