Figure 32, Inserting the piston seal into the pump head – Metrohm 882 Compact IC plus – Anion – MCS User Manual
Page 79
Advertising
■■■■■■■■■■■■■■■■■■■■■■
5 Operation and maintenance
882 Compact IC plus – Anion – MCS
■■■■■■■■
69
1
2
Figure 32
Inserting the piston seal into the pump head
4 Replacing the piston cartridge
Screw the assembled piston cartridge back into the pump head and
tighten, first by hand, then additionally by approx. 15° with a
wrench.
Cleaning the inlet valve and outlet valve
1 Removing valves
■
Unscrew the connection capillary for the auxiliary piston (13-1)
from the outlet valve holder.
■
Unscrew the holders for the inlet and outlet valves and remove
the valves (33-3) and (33-2).
Advertising