Metrohm 761 Compact IC - Manual (Page 72)

3 Operating tutorial
761 Compact IC
62
17 Display calibration curves
⇒ Click on <Graphs> in the Components window.
⇒ Select the desired component in the Component field for which
the calibration curve should be displayed (e.g. for
chloride
).
⇒ Close the Component - chloride window with <OK> .
⇒ Close the Components window below the chromatogram by
clicking on <OK> .
18 Save chromatogram and method
⇒ Close the chromatogram window. A window appears with the
message Changes in *.chw. Modified: Calibration. Save changes? .
⇒ Click on <Yes> . A window appears with the message *.chw
already exists. Overwrite? .
⇒ Click on <Yes> . A window appears with the message Method
s-03.mtw was modified. Save changes? .
⇒ Click on <Yes> . The File Save As window appears.
⇒ Save the method under the previously given name s-03.mtw .
If you want to store the method under a different name then
this must be newly selected for the system under PC icon /
Setup / Processing method .