Metrohm 766 IC Sample Processor - Manual (Page 44)

4.1 Fundamentals of operation
766 IC Sample Processor
39
Key Normal state Edit mode
Turn rack right
• The <è> key turns the sample
rack one position to the right, i.e. in
the clockwise direction. The next
lowest beaker position is placed
under the needle.
• The turning speed of the rack can
be defined in the Parameter menu.
• The rotation of the rack can only be
carried out when the lift is at or
above the shift position.
Move the cursor one column
to the right
• With the <è> key the cursor is
moved one column to the right in
an editing line with two parameters.
• Any data which has been altered
will not be carried over during this
action (see <ENTER> key).
INSERT
Add a command line to a
sequence
• Adds a new command line above
the current line in a sequence.
The NOP command (no operation)
automatically occupies this line and
has no function.
• The lines following this line are
shifted one line downwards.
DELETE
Delete a command line in a
sequence
• Deletes the current line in a
sequence.
• The lines which follow shift upwards
by one line.
TOWER
SELECT
Select parameter
• With the <SELECT> key given
data values can be selected for a
particular parameter in manual
operation.
• With every repeated keystroke the
next value that can be selected is
displayed. The last value is followed
again by the first.
• The data is accepted with
<ENTER>.