Metrohm 766 IC Sample Processor - Manual (Page 74)

4.3 Methods
766 IC Sample Processor
69
methods
>delete method Deletion of methods
>delete method
method: ********
8 ASCII characters
Selection of the method
Selection of the method which should be deleted using
the <SELECT> key.
>delete method
delete ******** ? Confirmation of the deletion
Confirmation with <ENTER>
Abort with <QUIT>
4.3.9 POWERUP method
When the 766 IC Sample Processor is switched on, the sample rack
and the needle are brought into the rest position. To bring them to other
positions, the "POWERUP" method can be used. This method is started
automatically, when the 766 IC Sample Processor is switched on.
Create a method that contains the command sequence which should
be worked off, when the 766 IC Sample Processor is switched on. Store
this method under the name 'POWERUP' (see section 4.3.8).