Metrohm 766 IC Sample Processor - Manual (Page 73)

4 Operation
766 IC Sample Processor
68
4.3.8 User defined methods
USER
METHOD
The <USER METHOD> key is used for the management of user de-
fined methods, which can be stored and recalled under freely se-
lectable names. A method comprises the parameters defined under the
<PARAM> key. The key opens the following main menu:
methods
>recall method Recall method
methods
>store method Store method
methods
>delete method Delete method
Repeated pressing of the <USER METHOD> key selects the sub-
menus in turn. Use <ê> or <é> to move up or down one menu item;
use <HOME> or <END> to move to the first or last menu item re-
spectively. The submenu is opened with <ENTER>, <QUIT> returns
to the normal state. The following listings show all dialog items which
appear under <USER METHOD>. The values shown in the display are
the default values, the possible entry values or ranges are shown below
the display.
methods
>recall method Recall existing method
>recall method
method: ********
8 ASCII characters
Selection of the method
With <SELECT> any method saved can be chosen. If
an "empty" method is to be loaded, the method
'********' can be selected. Like this, the actual work
memory is deleted.
methods
>store methods Storage of methods
>store methods
method: ********
8 ASCII characters
Define method name
"<" or ">" activates text edit mode where any method
name desired can be entered (see section 4.1.6).
When a certain method should be worked off after
switching on the IC Sample Processor, a command se-
quence can be stored under the name
'POWERUP'
. This
method is started automatically after switching on the
main switch (see section 4.3.9).