Metrohm 766 IC Sample Processor - Manual (Page 56)

4.2 Basic settings
766 IC Sample Processor
51
4.2 Basic settings
4.2.1 Configuration – <CONFIG> key
CONFIG
The <CONFIG> is used for the entry of basic settings of general appli-
cability. If you have changed the configuration, press <RESET> or
switch on and off the instrument to make the entries effective. The
<CONFIG> key opens the following main menu:
configuration
>auxiliaries Various general instrument settings
configuration
>rack definitions Sample rack settings
configuration
>RS232 settings Settings for RS232 interface
Repeated pressing of the <CONFIG> key selects the submenus in
turn. Use <ê> or <é> to move up or down one menu item; use
<HOME> or <END> to move to the first or last menu item respec-
tively. The submenu is opened with <ENTER>, <QUIT> returns to the
normal state. The following listings show all dialog items which appear
under <CONFIG>. The values shown in the display are the default val-
ues, the possible entry values or ranges are shown below the display.
configuration
>auxiliaries General instrument settings
>auxiliaries
dialog: english
english,deutsch,
français,español
Dialog language
english
English
deutsch
German
français French
español Spanish
>auxiliaries
display contrast 3
0 … 7
Display contrast
0 = large contrast
7
= weak contrast