Banner D10 Expert with Numeric Display—Discrete - Manual (Page 4)

NOTE: Depending on the application configuration and fibers used, the analog function may or may not be-
have linearly. The received light intensity will be dictated by the inverse square properties of light.
4 mA
20 mA
Dark Light
Signal
10V dc
0V dc
Voltage-Sourcing
Models
Current-Sourcing
Models
LO
Slope
DO
Slope
Figure 2. Analog output as a function of target position – two-
point static or dynamic TEACH
4 mA
20 mA
Max.
Dark
Max.
Light
Signal
10V dc
12 mA 5V dc
0V dc
Voltage-Sourcing
Models
Current-Sourcing
Models
LO
Slope
DO
Slope
Single Point
Taught
Figure 3. Analog output as a function of target position – win-
dow SET
Active Channel Select
• Selects which channel to teach
• Displays channel configuration information.
Push Button Remote
0.04 sec. ≤ T ≤ 0.8 sec.
Result
Single-click both buttons simul-
taneously. Triple-pulse the remote line.*
T T
T
T
T
Pointer icon: moves to the oth-
er channel indicator.
* Note: Triple-pulse will change the display, but will not save. To save Channel Select, make an adjustment
to that channel as a TEACH, SET, or Sensor Setup.
D10 Expert™ - Analog and Discrete Outputs
4 www.bannerengineering.com - tel: 763-544-3164 P/N 65448_web
rev. F