Profile series v.g1.5 mortise dorm lock, Installation instructions, Verify hand and bevel of door – SARGENT Profile Series v.G1.5 Mortise Locks User Manual
Page 6: 1 – door preparation
Profile Series v.G1.5 Mortise Dorm Lock
Left Hand
Hinges Left.
Open inward.
“LH”
Left Hand
Reverse Bevel
Hinges Left.
Open Outward
“LHRB”
Right Hand
Hinges Right.
Open Inward.
“RH”
Right Hand
Reverse Bevel
Hinges Right.
Open Outward.
“RHRB”
View lock body from top and from the outside (as shown above)
Bevel
Latchbolt
Right Hand
Right Hand
Reverse Bevel
Left Hand
Reverse Bevel
Lock Body
Verify hand and bevel of door
Connector and Wires
Deadbolt
Guardbolt
Latchbolt
Front
Top
Lock w/cylinder
Override
(Shown)
End Cap
Installation Instructions
6
Verify Hand and Bevel of Door
Outside
of door
Inside
of door
Outside
cylinder hole
Lever handle hole
Mortised
area
Pre-drilled and /or
Tapped holes (2 places)
Thru-bolt hole
Thru-bolt hole
Inside
cylinder
hole
Lever
handle hole
Thumb turn
lever hole
Hole for ribbon
cable from
controller to
keypad
Before Starting
Prep door according to Instruction Sheet A7454 and appropriate template:
Wood door - A7457
Metal door - 4533
6.1 – Door Preparation
4
© SARGENT Manufacturing Company 2006, 2007
For installation assistance, contact SARGENT at 800-810-WIRE (9473)