SARGENT 1331 Series Aluminum Closer - Manual

Right Hand Door – RH
Left Hand Reverse – LHR Left Hand Door – LH
Right Hand Reverse – RHR
Hinge Edge
of Door
Hinge Edge
of Door
Narrow Frame Installation
Closer mounts on opposite to hinge (push) side of door. 1331JPS arm illustrated.
125JV and 581-1 accessories required for this application (supplied separately).
See Pages 3 and 4
Right Hand Door – RH
Left Hand Reverse – LHR Left Hand Door – LH
Right Hand Reverse – RHR
Hinge Edge
of Door
Hinge Edge
of Door
Standard Frame Installation
Closer mounts on opposite to hinge (push) side of door. 1331JP10 Parallel Rigid Non Hold Open arm illustrated.
See Pages 3 and 4
Right Hand Door – RH
Left Hand Reverse – LHR Left Hand Door – LH
Right Hand Reverse – RHR
Hinge Edge
of Door
Hinge Edge
of Door
Flush Partition Installation
Closer mounts on opposite to hinge (push) side of door. 1331JCPSH illustrated.
125JVF accessory required for this application (supplied separately).
See Pages 3 and 4
® SARGENT 1331 DOOR CLOSER INSTALLATION
INSTRUCTIONS WITH FOLLOWING ARM SETS:
(JP10, JPH10); (JPS, JPSH); (JCPS, JCPSH)
Strength Adjustment From Size 1 Through 6.
CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY
OR DAMAGE
FOR ASSISTANCE, CALL SARGENT AT 1-800-727-5477 or
www.Sargentlock.com
A8160A
Copyright © 2013 Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing is prohibited.
63-8160-6000-999