SARGENT 1331 Series Aluminum Closer - Manual (Page 6)

Hold door open to opening angle desired and tighten holder-
adjustment-nut (wrench supplied) or use 1” Box or Open End
wrench. The Thumbturn Hold-Open feature is controlled by the knob
located on the arm of the unit. Turning this knob clockwise will
engage the Hold-Open mechanism and increase the Hold-Open
force. Turning this knob counterclockwise will reduce the Hold-
Open force and disengage the Hold-Open mechanism.
Thumbturn Hold-Open Feature (JPSH and JCPSH)
Thumbturn Hold Open
INCREASE
Friction Hold-Open Feature (JPH10)
DECREASE
Flush Partition
C
L
Hinge or
Pivot
1-1/4*
(32)
5/16
(8)
4
(102)
4
(102)
4
(102)
A
1331-D
Drop Plate
125JVF Bracket
Narrow Frame
C
L
Hinge or
Pivot
1-1/4*
(32)
5/16
(8) 4
(102)
4
(102)
4
(102)
*NOTE: This dimension must be
taken from the same surface that
the Soffit Plate is fastened to.
A
1331-D Drop Plate
125JV Bracket
*NOTE: This dimension must be
taken from the surface flush with the
bottom of 125JVF bracket or from the
bottom of the 125JVF bracket.
Standard Frame
C
LHinge or Pivot
4
(102)
4
(102)
4
(102)
1-1/4
(32)
5/16
(8)
A
1331-D Drop Plate
1331-D Drop Plate Mounting Holes
Page 6
Bottom of
125JVF bracket
Soffit
Plate
Frame Soffit
Soffit
Plate
Soffit
Plate
A8160A
Copyright © 2013 Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing is prohibited.
63-8160-6000-999