SARGENT 1331 Series Aluminum Closer - Manual (Page 2)

Page 2
JPS Parallel Solid Stop
Riveted Elbow
Removable Stop
JPH10 Parallel Rigid
Friction Hold Open
Riveted Elbow
Friction Hold Open Nut
JPSH Parallel Solid Stop
Thumbturn
Riveted Elbow
Removable Stop
Thumbturn Hold Open
JP10 Parallel Rigid
Riveted Elbow
Arm Options
Identify Arm Hand
“R” for Right Hand Door
“L” for Left Hand Door
L
JCPS and JCPSH Arm Kit - See page 3
Components
Screw Pack
Closer
Arm
Secondary Arm
Main Arm
Main Arm
Screw
Soffit
Plate
Backcheck Valve
Delay Valve
(Optional)
Latch Valve Sweep Valve
Power
Adjustment
Shaft
Closer
Body
582-1 Block
(provided)
Optional
Accessories
For Blade Stop
581-1 Spacer
For Frame
or Blade Stop
125JV Bracket
For Flush Partition
125JVF Bracket
9/32” (7 mm);
3/8” (9.5 mm) dia. x
3/8” (9.5 mm) deep on
door opposite to closer
Standard
Optional
Through-bolts and
grommet-nuts
All
Preparation for Fasteners
Door or Frame Fasteners Drill-Sizes
Self-Drilling Screw
Wood
(see Note)
3/16” (4.30 mm)
(pilot hole required)
1/4” - 20 machine screw Metal
Drill: #7 (0.201” dia.)
Tap: 1/4” - 20
Sleeve nuts and bolts
Hollow
Metal
9/32” (7 mm) through;
3/8” (9.5 mm) door face
opposite to closer
Aluminum
or Wood
3/8” (9.5 mm) through
Aluminum
or Metal
No drill required
Note: Pilot hole required when
using self-drilling screws
for wood door/frame
applications.
A8160A
Copyright © 2013 Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing is prohibited.
63-8160-6000-999