Opener seeding depth – Great Plains 1525P Operator Manual User Manual
Page 28
Advertising
1525P, 1510HDP
118-949M
8/14/2006
26
Refer to Figure 16
Minimum and maximum settings are indicated by
position of adjustment cam.
Each notch on the adjustment cam will increase
the down pressure on the opener springs. Use the
chart below as a setting reference.
Spring Down Pressure
Opener Seeding Depth
Refer to Figure 17
Side depth wheels beside the opener disks con-
trol opener seeding depth. The position of an
adjustable stop determines seeding depth.
Cam Notch
Pounds
one
345
two
370
three
400
four
450
five
500
six
550
21966
Minimum setting
Maximum setting
21967
Side depth wheel
Disk
22886
Figure 16
Adjustment Cam Settings
Figure 17
Side Depth Wheel
Advertising
This manual is related to the following products: